Commercial solar
Commercial Solar Systems for Australian Businesses
Commercial solar uses photovoltaic panels to generate electricity for a business from a rooftop, carport or ground-mounted array. The right system is sized for demand, generation hours, site limits and project economics, not the maximum number of panels.
Assess My Site for Commercial SolarShort answer
Commercial solar is a PV system sized for a business site, usually 30 kW to 1 MW. It suits sites with material daytime electricity use, a sound roof or land, and secure tenure. Configuration, connection approval, finance and ongoing monitoring all affect whether the project pays back as expected.
Why businesses install solar
Businesses with material daytime consumption can use more generation on site. Other drivers include energy-cost exposure, asset strategy, emissions reporting and resilience when paired with a correctly designed battery.
When solar may not be right
- Poor or ageing roof that needs replacing soon
- Short remaining lease without landlord agreement
- Low daytime electricity use
- Major network or switchboard upgrades required
Choose the right configuration
| Configuration | Site requirement | Approval considerations | Next action |
|---|---|---|---|
| Rooftop | Sound roof, low shading | Structural check, network export | Roof survey |
| Ground-mounted | Clear land near switchboard | Planning, cabling distance | Land and planning check |
| Carport | Car park with space | Structural design, council | Concept design |
| Off-grid or hybrid | Remote or weak grid | Generator integration | Load study |
| Multi-site | Portfolio of sites | Per-site network rules | Portfolio screening |
How a project runs
- Bill and interval data
- Site survey
- Design
- Structural and electrical review
- Network application
- Commercial proposal
- Installation
- Inspection and commissioning
- Monitoring
Who delivers the project
The business owner, the landlord if leased, a solar retailer or developer, a licensed electrical contractor, SAA accredited designers and installers where required, the local network (DNSP), any finance or PPA provider, and Shelby as an assessment and introduction facilitator.
Frequently asked questions
What does commercial solar cost?
Cost depends on size, roof and electrical works, network requirements and access. Two same-sized systems can differ a lot. Compare itemised quotes rather than a single $ per kW figure, and check what is excluded.
Do I need a roof inspection?
Yes. A structural and condition check confirms the roof can carry the array for its full life. Replacing a roof after installation costs far more than doing it first.
Can a tenant install solar?
Often, with written landlord consent and clear terms on ownership, maintenance, removal and what happens if the lease ends or the building sells.
Can I export electricity?
Only within your network's connection approval. Some sites are export-limited or zero-export, which changes the best system size.