MANUFACTURING, PACKAGING AND PLASTICS ENERGY GUIDE
What is the factory using during shutdown?
Weekend and overnight use is the clearest baseline a factory has. Compressors, chillers and extraction often keep running when production does not. This guide helps Australian manufacturing, packaging and plastics businesses find a baseline before pricing equipment, solar or bioenergy.
Check your bill now
✓ Free ✓ Private results ✓ About a minute ✓ Nothing shared without your consent ✓ Any Australian business, no feedstock needed
The short answer
Divide the energy on two comparable bills by your tonnes or units produced for the same dates. Then look at what runs when activity stops. Most businesses assume the tariff is the problem, but the baseline usually shows where the money goes first, and it makes a contract review or equipment quote far easier to judge.
Your first evidence check
- 1 Check compressors, chillers, process heat and extraction.
- 2 Compare the weekend profile with shift hours.
- 3 Ask maintenance to investigate leaks or unnecessary unloaded operation before seeking compressor quotes.
What to bring
- Two recent bills covering similar periods
- Interval or smart meter data if your retailer provides it
- Production or activity records for the same dates
Compare two periods
Use the same units for both periods. Energy ÷ tonnes or units produced gives kWh/t. Nothing is saved unless you choose to.
Enter energy and output for both periods to compare.
A change in intensity shows where to look. It does not prove a saving: mix, weather and billing periods can all move it.
Compressed air equipment guide
Illustrative: a submeter records a steady 8 kW for 12 idle hours, which is 96 kWh. At an assumed $0.20/kWh the energy component is $19.20. Find out what must run in those hours before calling it avoidable.
Not a Shelby client result. Published guides support investigation; they do not establish your savings.
Next steps
- Upload my energy bill
- Read the electricity guide
- Request a contract review
Register interest in an energy review
Private. Shelby reviews your request first and only shares details after you agree to a named introduction.
Some figures need more information. They are saved as incomplete, exactly as shown.
ASK BIPA · BUSINESS ENERGY
Send Sophie a photo or PDF of your electricity or gas bill. She reads it with the same checker as this page and shows your usage, charges and cost per unit, then can take your free expert assessment request.
- Upload a bill or type the figures you know
- Check what was read
- See your cost per unit and one next check
- Request a free expert assessment
Your quantities and site details stay private unless you choose to publish, in line with Shelby's privacy policy.
Frequently asked questions
How can a manufacturing, packaging and plastics business start saving on energy?
Start with two recent bills and your tonnes or units produced for the same dates. Divide energy by output to get an intensity figure, check what runs when activity stops, then review your supply contract before pricing equipment, solar or bioenergy.
Does a lower energy intensity prove a saving?
No. Intensity can move with product mix, weather or a different billing period. It tells you where to look. Price, fixed charges and contract terms need to be compared separately.
Do I need a bioenergy project or feedstock to get help?
No. Any Australian business buying electricity or gas can check a bill and register interest in a review. Bioenergy and generation are separate options you can explore later.
Will my details be shared with an energy broker?
Not without your consent. Shelby reviews each request first and shows you any proposed introduction before sharing your details.
Related industry guides
- Timber and sawmills
- Mining and quarries
- Recycling and waste processing
Sources and references
- Australian Government (energy.gov.au)
Checked 18 November 2026.